Fuel and Electrical Safety
Operate outdoors and follow the current manuals
This is a gasoline-powered generator. Read the current DJI manual and
applicable Canadian safety requirements before use.
Generator exhaust contains carbon monoxide, an odourless and
colourless gas that can cause serious injury or death. Never operate
the generator indoors or in a partly enclosed space. Health Canada
advises at least 6 m (20 ft) from buildings, with exhaust directed
away from doors, windows and air intakes.
The engine is not filled with oil before leaving the factory. Add the
specified engine oil before first use. Do not start the generator
before adding engine oil and at least 1 L of gasoline.
Fuel is flammable and explosive. Stop the generator and allow it to
cool completely before refuelling. Do not overfill, and clean any
spilled fuel before operation.
After operation, allow the generator to cool for at least 15 minutes
before loading it into a transport vehicle. Keep it stable and secure
during transport to help prevent fuel spills.
DJI states that the D14000iE cannot connect to grid power. Use the
appropriate separate charger when grid-powered DB2160 charging is required.
Use the ground terminal as directed by DJI. Before maintenance, stop
the generator, disconnect the battery and electrical devices, and
allow the unit to cool completely.
Do not connect electrical devices before starting the generator.
Connected AC loads reduce the charging capacity available to the
battery and extend charging time.
Engine-oil consumption increases in high-temperature environments.
Check the oil level before each use, fill to the rated level and
shorten the oil-change interval as directed by DJI.